Thermogroup SSB44M Thermorail 240V 600x800mm Brushed Stainless Steel Heated Towel Rail

In a bathroom, there are electrical zones that influence where electrical items can be installed. In a wet area such as above a bath or in a shower and areas within 600mm of a tap, any electrical products must be low voltage.

Thermorail's 240V range of Heated Towel Rails are designed for use in bathrooms, outside of the wet areas. Being 240 Volts means that the rails can be hardwired directly to existing power or plugged in for a retro-fit application. 

The SSB44M Heated Towel Rail is a 600x800 7 bar rail, ideally sized to fit two towels.

The SSB44M towel heater features multiflex wiring. This means that you have a connection point on the right or left hand side of the rail, this would be typically at the bottom but the rail can be flipped so that it is at the top and provides the option of hardwired or plugin, all as standard out of the box.

The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees.

• Energy efficient - Thermorail's range of dry, electric element Heated Towel Rails are extremely energy efficient. An average 600x800mm ladder rail will cost as little as 1c per hour to run. The dry element also ensures a rapid heat-up time of approx 10-30 minutes.
• Quality stainless steel - Thermorail's rails are made from high-quality Stainless Steel designed for use in the bathroom and are backed by warranties for your peace of mind. 
• Healthy drying - A Heated Towel Rail ensures your towel is kept dry, reducing the likelihood of germ and bacteria buildup.
• Australian Compliant - Thermorail's range of Heated Towel Rails are certified in accord with Australian standard AS/NZS 60335.1 and AS/NZS 60335.2.43.
• Hardwired or plug-in